Horizontal Auger Feed Mixer Trailers (w/transmission system) 8m³
1 May 2018
Horizontal Auger Feed Mixer Trailers (w/transmission system) 5m³
1 May 2018

Horizontal Auger Feed Mixer Trailers (with double auger transmission system) 6m³

Our double auger reducer feed mixers are manufactured in full hydraulic form. It has oil tank. Machines have a single-sided unloading band on the right side, optionally discharge gate can be built on the right side or both sides. Scale can be fitted to our machines on request. Electrical unit can be built on request. Our reducer feed mixing trailers are in sizes of 5m³, 6m³, 8m³, 10m³, 12m³. Larger machines can be manufactured on request.
Purpose of the machine: The purpose is to make a homogeneous mixture of different feed materials and distribute this mixture equally to animals. Digestion of the mixed feed is easy and nutritious. A visible increase in the meat and milk yield of the animals is ensured. The feed prepared at the trailer is more homogeneous than the feed mixed by hand. It provides the animal to eat the feed more appetent. Meat and milk yields will also be equal to each other as the animals consuming the feed prepared in the feed mixing trailers will consume the feed at the same ratio with the same homogeneity. The machine minces the fibrous feeds via its chopping blades. It provides homogeneity by mixing the fibrous feedstuffs that are minced by the mixer helices on its top with other feedstuffs. By this means, the evacuation of the fibrous feedstuff without being digested is prevented and utmost benefit is provided from the feedstuff. Optional equipment such as loading milling machine, hydraulic back cover, double-sided drainage band can be attached to the trailer in order to facilitate the loading and unloading the feedstuffs on the trailer. Optionally a digital weighing machine, a park separating jack can also be added. The trailer is connected to the tractor by a hitching system. The trailer takes its movement from the tail axle of the tractor. The hydraulic systems on it can be used easily via the ergonomic control levers till the user. Optionally, it is also available as an electric-motor fixed type.



1880 mm


4550 mm


2450 mm

Stock volume

6 m³

Empty Weight

2700 kg

Back Cover Type

Hydraulic Bucket

Auger System

Double Helix on The Base

Drive System

Planetary Gearbox

Power Take-Off Cycle

540 d/ min.

Weighbridge System

Digital Balance

Hydraulic Pressure Source

Hydraulic Pump on Machine

Mixture Homogeneity

% 95 / 15 minute

Oil Pump Power Source


Required Power(Min.)

55 bg

Number of Motion Input Shaft




Tractor Separator Foot

Hydraulic Piston

Draining Cap

Right-Sided Unloading Hydraulic

Tank Body Sheet Thickness- Floor Sheet Thickness

10 mm

No. of chopping blades on the auger

80  Pieces