Vertical Auger Feed Mixer Trailers (with electricity and a tractor) 4m³
1 May 2018
Vertical Auger Feed Mixer Trailers (with electricity and a tractor) 2.5m³
1 May 2018

Vertical Auger Feed Mixer Trailers (with electricity and a tractor) 3.5m³

Our vertical feed mixing and spreading trailers have single auger. Our machine has a transmission system. Full hydraulic and semi hydraulic machines are available. Scale can be added optionally. There is single-sided discharge gate on the right side, optionally this can be manufactured on the both sides or on left side as single-sided.
Purpose of the machine: The purpose is to make a homogeneous mixture of different feed materials and distribute this mixture equally to animals. Digestion of the mixed feed is easy and nutritious. A visible increase in the meat and milk yield of the animals is ensured. The feed prepared at the trailer is more homogeneous than the feed mixed by hand. It provides the animal to eat the feed more appetent. Meat and milk yields will also be equal to each other as the animals consuming the feed prepared in the feed mixing trailers will consume the feed at the same ratio with the same homogeneity. The machine minces the fibrous feeds via its chopping blades. It provides homogeneity by mixing the fibrous feedstuffs that are minced by the mixer helices on its top with other feedstuffs. By this means, the evacuation of the fibrous feedstuff without being digested is prevented and utmost benefit is provided from the feedstuff. Optional equipment such as loading milling machine, hydraulic back cover, double-sided drainage band can be attached to the trailer in order to facilitate the loading and unloading the feedstuffs on the trailer. Optionally a digital weighing machine, a park separating jack can also be added. The trailer is connected to the tractor by a hitching system. The trailer takes its movement from the tail axle of the tractor. The hydraulic systems on it can be used easily via the ergonomic control levers till the user. Optionally, it is also available as an electric-motor fixed type.
1000_1000

TECHNICAL CHARACTERISTICS:

Width

1600 mm

Lenght

3000 mm

Height

2300 mm

With The Bucket Height

3250 mm

Stock volume

3 ,5m³

Empty Weight

900 kg

Auger System

Vertical Auger

Drive System

Tractor Tail Shaft

Mixture Homogeneity

% 95 / 15 minute

Required Power(Min.)

20 hp Tractor 15 hp Electricity Engine

Number of Motion Input Shaft

One

Draining Cap

Unilateral Unloading  Hydraulic

Floor Sheet Thickness

14 mm

Tank Body Sheet Thickness

4 mm

No. of chopping blades on the auger

5 Pieces

Loading

Hydraulic Bucket